"Plug-In" Link Engine Management
These are either dedicated Engine Management systems built for a specific application (vehicle) or AdaptaLinks that enable Link Wire In Engine Management Systems to plug into the factory wiring harness.
Don’t want to modify your vehicles wiring system? No
problem, Link offers a large range of Plug-In Engine Management
solutions. These systems offer minimum installation, sometimes not
even requiring the bonnet to
be opened! Link’s Plug-In engine
management systems either replace the circuit board inside the factory ECU
enclosure or connect using an AdaptaLink which ensures a direct connection. This provides an unobtrusive means
of fitting a fully
programmable engine management system
to your vehicle without any
permanent modifications and a completely invisible install.
Link Plug-In Engine Management Systems cover a large range of applications. Each system is individually designed
and optimised to suit a particular model of vehicle.
WRXLinkG3 for the V7-9 WRX & STI
Link Plug-In Systems give all the benefits of a fully programmable engine management system while still retaining features present in the factory system such as air conditioning control, carbon canister purge and idle speed control. As an additional advantage, Link's new generation of Plug-In Engine Management Systems include additional connectors allowing extra inputs and outputs to be used for advanced features.
Click on a logo at the bottom of this page to find out which models we support..
Link Plug-In Engine Management Systems cover a large range of applications. Each system is individually designed
and optimised to suit a particular model of vehicle. Link Plug-In
Systems give all the benefits of a fully programmable engine management
system while still retaining features present in the factory system
such as air conditioning control, carbon canister purge and idle
speed control. As an additional advantage, Link's new generation of
Plug-In Engine Management Systems include additional connectors
allowing extra inputs and outputs to be used for advanced
features.
Link Plug-In Engine Management Systems are supplied with all
necessary parts and instructions required for installation. Each
system comes pre-programmed with basic settings that allow the engine
to start up and run before further tuning.
Some Link Plug-In Engine Management Systems allow removal of the engine Air Flow Meter (AFM) allowing a more efficient intake system to be installed. For race applications, some Link Plug-In Engine Management Systems can be configured to have advanced features such as Anti-Lag and Launch Control. This can be a significant advantage where race regulations don't allow Wire-In Engine Management Systems to be fitted.
|
Feature
|
Benefit
|
|
|
•
|
Custom Design
|
Hardware is custom designed for each application
|
|
•
|
Plug In
|
Fast reliable installation, car
integrity is retained. Sometimes the complete installation can take
place without lifting the bonnet. Uses 100% factory sensors.
|
|
•
|
Discrete & Unobtrusive
|
Easily removed without trace.
|
|
•
|
Removable
|
“Test drive” system in car. Later,
selling the system separately from the vehicle is an option.
|
|
•
|
Dedicated Software
|
Plug-In systems have software written
specifically for each application with good safe settings as a starting
point for further setup and tuning.
|
|
•
|
Factory Wiring
|
No wiring modifications.
|
|
•
|
Factory Sensors
|
Ease of system installation and vehicle
servicing.
|
|
•
|
Tuning
|
Use our Tuning Tools.
|
|
•
|
Custom Software | Special programmes e.g. Antilag etc. available for additional charge. |
Supported Makes / Models
Click on one of the logos below to see which models Link supports| |
|
|
|
|
|
|
|||||
| |
|
|
|
|
|
|
|
|
|
|
Link GTR Circuit Car Update
