Skip to content. | Skip to navigation

Personal tools
Log in
Sections
You are here: Home Forums Link G2/G3 Engine Management LEM G3 should i be running accell' enrichment when decelerating?

LEM G3 should i be running accell' enrichment when decelerating?

Up to Link G2/G3 Engine Management

LEM G3 should i be running accell' enrichment when decelerating?

Posted by reuban shepherd at August 24. 2011

Unsure whether this should be happening or not, does this also occur with the g4?

Re: LEM G3 should i be running accell' enrichment when decelerating?

Posted by Jurgen Biggelaar at August 29. 2011

Hi Reuban.

Unsure wether what!? should be happening?  In most cases, it would be one or the other as you are either standing on the gas and the ECU sees this and enriches by the specified amount for a brief period... OR; you will be decellerating and the engine is in vaccuum, often bringing on an overun fuel cut depending on how the map has been programmed. 

Any which way you look at it, the Link units cannot perform enrichment on decell so this may answer your question well enough.  Long story short, Link do not yet have "decell en-leanment", or the ability to richen the mixture during decelleration. 

Jurgen

Powered by Ploneboard
Document Actions
Portlet ECU red Xtreme image

Xtreme

Our most powerful engine management system ever, equals or betters any ECU on the market.  Whatever the application, the Xtreme's advanced configurability enables today's complex engines to be optimised.

Read More

Link Engines

Plug-In

Free yourself from the constraints of the factory ECU. Link's G4 Plug-Ins fit discretely inside the original enclosure. Installation is a breeze, no alteration of the factory wiring loom required. An XS connector provides additional inputs and outputs such as oil pressure inputs or anti-lag / logging switches (the number available depends on the application).

Read More