Skip to content. | Skip to navigation

Personal tools
Log in
Sections
You are here: Home › Forums › Link G2/G3 Engine Management › link g3 plus ubs driver problem

link g3 plus ubs driver problem

Up to Link G2/G3 Engine Management

link g3 plus ubs driver problem

Posted by philip tram at October 31. 2011

hi i have a links g3 plus and i downloaded the  pc link v 3.40 and i cant get the ubs driver to instlal ccorrectly.

Re: link g3 plus ubs driver problem

Posted by philip tram at November 02. 2011

so i figure this out by just using the g4 software but the g4 doesnt have the stock rb25det map should i just use the rb20det?

and another thing is it safe to drive to my tuner without the air temp sensor?

Re: link g3 plus ubs driver problem

Posted by Simon (Link Staff) at November 02. 2011

RB20 one wont be to bad to start form.

You wont be able to put it stright in to the ECU though as it will be geared for a G4 plugin.

However the numbers will work if manually entered in to the G3.

Air temp won't make too much difference but I would trailer if its had no tuning done.

Powered by Ploneboard
Document Actions
Portlet ECU red Xtreme image

Xtreme

Our most powerful engine management system ever, equals or betters any ECU on the market.  Whatever the application, the Xtreme's advanced configurability enables today's complex engines to be optimised.

Read More

Link Engines

Plug-In

Free yourself from the constraints of the factory ECU. Link's G4 Plug-Ins fit discretely inside the original enclosure. Installation is a breeze, no alteration of the factory wiring loom required. An XS connector provides additional inputs and outputs such as oil pressure inputs or anti-lag / logging switches (the number available depends on the application).

Read More