Skip to content. | Skip to navigation

Personal tools
Log in
Sections
You are here: Home › Forums › Link G2/G3 Engine Management › G3 adaptor loom to 4 plug wrx

G3 adaptor loom to 4 plug wrx

Up to Link G2/G3 Engine Management

G3 adaptor loom to 4 plug wrx

Posted by kev hills at August 19. 2011

hi iv got a g3 and a adaptor box that plugs to a 4 plug wrx  loom but i dont have the loom that goes between. is there a pin out or a loom that is available to use?

Re: G3 adaptor loom to 4 plug wrx

Posted by Jurgen Biggelaar at August 23. 2011

Hi Kev.

We don't hold these any more unfortunately, but we do have pin kits for the G3 LEM... Is it one of these (26pin)?  If so these are easy enough to make up.  Give us a call, or email for pricing on that... Or on how to do it if needed.

Jurgen

Re: G3 adaptor loom to 4 plug wrx

Posted by kev hills at August 23. 2011

Previously Jurgen Biggelaar wrote:

Hi Kev.

We don't hold these any more unfortunately, but we do have pin kits for the G3 LEM... Is it one of these (26pin)?  If so these are easy enough to make up.  Give us a call, or email for pricing on that... Or on how to do it if needed.

Jurgen

are all the adaptor cables the same? as i have a mate with 1 would it work?

Re: G3 adaptor loom to 4 plug wrx

Posted by kev hills at August 26. 2011

are all the adaptor cables the same? as i have a mate with 1 would it work?

Re: G3 adaptor loom to 4 plug wrx

Posted by Simon (Link Staff) at August 26. 2011

All the LEM based ones are.  Only bits that change are the actual adapter box on the end.

Powered by Ploneboard
Document Actions
Portlet ECU red Xtreme image

Xtreme

Our most powerful engine management system ever, equals or betters any ECU on the market.  Whatever the application, the Xtreme's advanced configurability enables today's complex engines to be optimised.

Read More

Link Engines

Plug-In

Free yourself from the constraints of the factory ECU. Link's G4 Plug-Ins fit discretely inside the original enclosure. Installation is a breeze, no alteration of the factory wiring loom required. An XS connector provides additional inputs and outputs such as oil pressure inputs or anti-lag / logging switches (the number available depends on the application).

Read More