Skip to content. | Skip to navigation

Personal tools
Log in
Sections
You are here: Home › Forums › Link G1 Forum › VQ30DE

VQ30DE

Up to Link G1 Forum

VQ30DE

Posted by jason mcallister at January 09. 2012

Hi Was woundering if someone could help. Im wiring a G1 V5 to a VQ30DE in a boat and I see the engine has two crack angle sensors which one do I wire in the front one that runs off cracnk pully or the rear that runs off a trigger plate on flexi plate. The front one only has a coulpe of  trigger points the rear has teeth all the way round on trigger wheel.

Thanks.

Re: VQ30DE

Posted by Scott at January 09. 2012

Hi Jason,

Going on previous experience I would recommend using the front sensor. Let us know if you have any problems,

Scott

Powered by Ploneboard
Document Actions
Portlet ECU red Xtreme image

Xtreme

Our most powerful engine management system ever, equals or betters any ECU on the market.  Whatever the application, the Xtreme's advanced configurability enables today's complex engines to be optimised.

Read More

Link Engines

Plug-In

Free yourself from the constraints of the factory ECU. Link's G4 Plug-Ins fit discretely inside the original enclosure. Installation is a breeze, no alteration of the factory wiring loom required. An XS connector provides additional inputs and outputs such as oil pressure inputs or anti-lag / logging switches (the number available depends on the application).

Read More