Skip to content. | Skip to navigation

Personal tools
Log in
Sections
You are here: Home Forums Link G1 Forum Wanted: Link G1 Tuning Module

Wanted: Link G1 Tuning Module

Up to Link G1 Forum

Wanted: Link G1 Tuning Module

Posted by Ross Walker at October 21. 2011

Looking for a Link hand controller / tuning module.

Please email me at: ross@rosssport.com if you can help please :)

Re: Wanted: Link G1 Tuning Module

Posted by Jurgen Biggelaar at November 16. 2011

Impossible to find Ross.  If you hunt hard enough, there was a post on here somewhere suggesting someone had some old stock in the states I think.  I would doubt it, but may be worth a shot depending on how desperate you are.  Failing that you could upgrade to PC tune firmware, or go to a new G4 ;)

Jurgen

Re: Wanted: Link G1 Tuning Module

Posted by Craig Tanson at February 23. 2012

My G1 was only controllable by the tuning module and at the time could not find anyone who had one so I did the upgrade via Fine Line Imports here in California.  I believe they sent it to a Link shop in Southern California who soldered a new chip on the board. I now have a usb to com port adapter and can connect it to my laptop. It was around 200 US to convert. I don't remember the exact cost.

Powered by Ploneboard
Document Actions
Portlet ECU red Xtreme image

Xtreme

Our most powerful engine management system ever, equals or betters any ECU on the market.  Whatever the application, the Xtreme's advanced configurability enables today's complex engines to be optimised.

Read More

Link Engines

Plug-In

Free yourself from the constraints of the factory ECU. Link's G4 Plug-Ins fit discretely inside the original enclosure. Installation is a breeze, no alteration of the factory wiring loom required. An XS connector provides additional inputs and outputs such as oil pressure inputs or anti-lag / logging switches (the number available depends on the application).

Read More