Skip to content. | Skip to navigation

Personal tools
Log in
Sections
You are here: Home › Forums › Link G4 Engine Management › Wiring Crank Angle Sensor

Wiring Crank Angle Sensor

Up to Link G4 Engine Management

Wiring Crank Angle Sensor

Posted by Mark Hamilton at January 16. 2012

I'm about to start wiring a Toyota 2zz-ge for the G4 Storm and not sure about how to wire the Crankshaft Angle Sensor.  What type of unit does the 2zz have?  What voltage does it need 12, 8 or 5?

For that matter, what about the the cam sensors?

Cheers, Mark

Re: Wiring Crank Angle Sensor

Posted by Scott at January 17. 2012

Hey Mark,

I don't have any wiring diagrams or info on the on 2zz-ge cam and crank sensors. They are likely to be reluctor sensors. Perhaps someone else on the forum will have some info they can share.

Scott.

Re: Wiring Crank Angle Sensor

Posted by Felix Kreysig at January 18. 2012

They are reluctor type. You actually have 3 different connections. G22+ for cam angle, NE+ for crank angle and NE- which is the negative connection for both NE+ an G22+. For correct wiring take NE- from the ECU Side of the loom and wire it to "Sensor Ground". NE+ will go to Trig 1  and G22+ will go to Trig 2 . Unfortunately I am not sure regarding setup... I think its the same as for 3SGTE.

Re: Wiring Crank Angle Sensor

Posted by Simon (Link Staff) at January 19. 2012

In the help file do a search for 1zz and it will give you all the setup info.

Powered by Ploneboard
Document Actions
Portlet ECU red Xtreme image

Xtreme

Our most powerful engine management system ever, equals or betters any ECU on the market.  Whatever the application, the Xtreme's advanced configurability enables today's complex engines to be optimised.

Read More

Link Engines

Plug-In

Free yourself from the constraints of the factory ECU. Link's G4 Plug-Ins fit discretely inside the original enclosure. Installation is a breeze, no alteration of the factory wiring loom required. An XS connector provides additional inputs and outputs such as oil pressure inputs or anti-lag / logging switches (the number available depends on the application).

Read More