Skip to content. | Skip to navigation

Personal tools
Log in
Sections
You are here: Home › Forums › Link G4 Engine Management › Configuring G4 so Y axis is TPS only.

Configuring G4 so Y axis is TPS only.

Up to Link G4 Engine Management

Configuring G4 so Y axis is TPS only.

Posted by Chris Harris at January 30. 2012

Just installed & wired G4 Extreme into racecar, on first quick look at configuration, need load axis to be controlled by TPS only. Instructions are there confirming this needs to be done with .800 valve lift, but can't find actual prompt amongst configuration tables to program this in.

Appreciate help before I next get time to finish this task.  

Re: Configuring G4 so Y axis is TPS only.

Posted by Scott at January 31. 2012

Hi Chris,

Connect your ECU to PCLink (F3 key). Select the table you wish you change in the ECU settings window. Right click on the table and click 'Axis Setup'. Change the current load axis (probably MGP) to TPS (MAIN). Click 'Init Axis', then Click Apply and then Close. You will need to do this for each table you wish to change,

Make sure when you have finished making your changes that you store (F4 Key) the new settings.

Scott.

Re: Configuring G4 so Y axis is TPS only.

Posted by Scott at January 31. 2012

Hi again Chris,

In the above message I have made the assumption you are running the latest PCLink (4.8.82). Let me know if you are running a different version and need some help.

Cheers,

Scott.

Re: Configuring G4 so Y axis is TPS only.

Posted by Chris Harris at January 31. 2012

Thanks Scott,

Will try next time I get back to it. I have the (4, 8, 82). See you have an even later version, should I upgrade before continuing.

Chris H.

Re: Configuring G4 so Y axis is TPS only.

Posted by Scott at January 31. 2012

Hi Chris,

Currently the latest release of PCLink is 4.8.82. If you are running that already you will be fine. You can configure the table axis by right clicking on the table in any version, just the actual layout has been changed over the versions.

Regards,

Scott.

Powered by Ploneboard
Document Actions
Portlet ECU red Xtreme image

Xtreme

Our most powerful engine management system ever, equals or betters any ECU on the market.  Whatever the application, the Xtreme's advanced configurability enables today's complex engines to be optimised.

Read More

Link Engines

Plug-In

Free yourself from the constraints of the factory ECU. Link's G4 Plug-Ins fit discretely inside the original enclosure. Installation is a breeze, no alteration of the factory wiring loom required. An XS connector provides additional inputs and outputs such as oil pressure inputs or anti-lag / logging switches (the number available depends on the application).

Read More