Skip to content. | Skip to navigation

Personal tools
Log in
Sections
You are here: Home › Forums › Link G4 Engine Management › evo 3 start up

evo 3 start up

Up to Link G4 Engine Management

evo 3 start up

Posted by brayden at February 02. 2012

i have a evo 3 with g4 plug n play, Im starting it up today but am wondering what i need do to get a good start as it has 1250cc injector's etc. It did start but ran very rough and smelt rich etc.

Re: evo 3 start up

Posted by Scott at February 03. 2012

Hi Brayden,

Perhaps your master fuel number could be reduced through PCLink. If you do not have any tuning experience it is probably best to then take the car to a Link dealer. Where abouts are you based? We can probably recommend someone in your area.

Scott.

Powered by Ploneboard
Document Actions
Portlet ECU red Xtreme image

Xtreme

Our most powerful engine management system ever, equals or betters any ECU on the market.  Whatever the application, the Xtreme's advanced configurability enables today's complex engines to be optimised.

Read More

Link Engines

Plug-In

Free yourself from the constraints of the factory ECU. Link's G4 Plug-Ins fit discretely inside the original enclosure. Installation is a breeze, no alteration of the factory wiring loom required. An XS connector provides additional inputs and outputs such as oil pressure inputs or anti-lag / logging switches (the number available depends on the application).

Read More