Skip to content. | Skip to navigation

Personal tools
Log in
Sections
You are here: Home › Forums › Link G4 Engine Management › LINK PLUG IN BASE MAP ??

LINK PLUG IN BASE MAP ??

Up to Link G4 Engine Management

LINK PLUG IN BASE MAP ??

Posted by ANDREW CAITHNESS at February 02. 2012

HI HAVE A LINK G4 WITH A BASE MAP FOR MY CIVIC SIR. CAN I DRIVE ON THAT , OR IS IT A BAD IDEA? I NEED TO RUN MY MOTOR IN AND ITE THE ONLY ECU I HAVE . OTHERWISE I HAVE TO GET A NEW STOCK ECU???

Re: LINK PLUG IN BASE MAP ??

Posted by Scott at February 03. 2012

Hi Andrew,

It is probably best to speak to a local tuner, as the process will depend on how stock your engine is. Where abouts are you located? I can give you contact details for your closest tuner.

Scott.

Re: LINK PLUG IN BASE MAP ??

Posted by DION THOMAS at February 16. 2012

Hi, I'm new to this forum and need some much needed and very urgent info. I bought the G4 Plug-In which i installed in a Mazda bpt 1800. unfortunately, the PcLink software does not have a base map for the Distributor type. Can anyone assist in sending me a base map or directing me as to where I can locate same??

Thanx,

Dion.

Re: LINK PLUG IN BASE MAP ??

Posted by Scott at February 16. 2012

Hi Dion,

Open PCLInk, connect to your ECU (Press F3) and go to the ECU settings section. Click Ignition > Ignition Setup > Ignition Main. In the Ignition Mode section that now shows in the window, select Distributor. Press F4 to save this to your ECU.

Get in touch if you need more help,

Scott.

Re: LINK PLUG IN BASE MAP ??

Posted by DION THOMAS at February 16. 2012

Hey Scott, 

Thanx for the Info. Will do. Let you know how it goes.

Powered by Ploneboard
Document Actions
Portlet ECU red Xtreme image

Xtreme

Our most powerful engine management system ever, equals or betters any ECU on the market.  Whatever the application, the Xtreme's advanced configurability enables today's complex engines to be optimised.

Read More

Link Engines

Plug-In

Free yourself from the constraints of the factory ECU. Link's G4 Plug-Ins fit discretely inside the original enclosure. Installation is a breeze, no alteration of the factory wiring loom required. An XS connector provides additional inputs and outputs such as oil pressure inputs or anti-lag / logging switches (the number available depends on the application).

Read More