Skip to content. | Skip to navigation

Personal tools
Log in
Sections
You are here: Home › Forums › Link G4 Engine Management › Link g4 wire in

Link g4 wire in

Up to Link G4 Engine Management

Link g4 wire in

Posted by Mike Turner at January 04. 2012

Hi Guys,

Wanting to run g4 extreme and fully rewire r33,Can I run speed sensitive steering through g4.

Steering is pulse activated.

Wondering if i used speed from speedo and manualy tune pulse from ecu.Earth trigger maybe.

Then just say for now 100k to half a second pulse to increase harder steering Etc.

What do you think.Cheers Mike

Re: Link g4 wire in

Posted by Ashley Duncan at January 18. 2012

Unfortunately we have no information on the R33 steering.  To work out how it should be controlled you may need to scope the factory system controlling in in order to reproduce the functionality.  If you could provide some information or scope pictures then we may be able to discuss how to control it.

Powered by Ploneboard
Document Actions
Portlet ECU red Xtreme image

Xtreme

Our most powerful engine management system ever, equals or betters any ECU on the market.  Whatever the application, the Xtreme's advanced configurability enables today's complex engines to be optimised.

Read More

Link Engines

Plug-In

Free yourself from the constraints of the factory ECU. Link's G4 Plug-Ins fit discretely inside the original enclosure. Installation is a breeze, no alteration of the factory wiring loom required. An XS connector provides additional inputs and outputs such as oil pressure inputs or anti-lag / logging switches (the number available depends on the application).

Read More