Skip to content. | Skip to navigation

Personal tools

Sections
You are here: Home › Forums › Link G4 Engine Management › Idle Ignition Target

Idle Ignition Target

Up to Link G4 Engine Management

Idle Ignition Target

Posted by Andy Drummond at May 24. 2012

Hi

Have a G4 extreme with the latest firmware. Want to use Idle Ignition Control (NOT using Idle Speed Control). I have a question, where is the "Idle Target RPM" setting in PCLink? That is the idle rpm set point.

Cheers

Andy

Re: Idle Ignition Target

Posted by Scott at May 28. 2012

Hi Andy,

In PCLink version 4.9.1, under ECU Settings, you will find "Idle Ignition Control". With this set to On, you will then have access to the "Idle Igntion Table" Where you can set the ignition timing at Whichever RPM you set the x axis up with. There is no 'Idle Target RPM' as such as you can adjust all the RPM range.

For more on Idle Ignition control see PCLink Help > G4 ECU Tuning Functions > Ignition > Idle Ignition Table

Cheers,

Scott.

Powered by Ploneboard

Document Actions

Portlet ECU red Xtreme image

Xtreme

Our most powerful engine management system ever, equals or betters any ECU on the market.  Whatever the application, the Xtreme's advanced configurability enables today's complex engines to be optimised.

Read More

Link Engines

Plug-In

Free yourself from the constraints of the factory ECU. Link's G4 Plug-Ins fit discretely inside the original enclosure. Installation is a breeze, no alteration of the factory wiring loom required. An XS connector provides additional inputs and outputs such as oil pressure inputs or anti-lag / logging switches (the number available depends on the application).

Read More