Personal tools
You are here: Home → Forums → Forums → Link G2/G3 Engine Management → What do the inj outputs actually supply?

What do the inj outputs actually supply?

Up to Link G2/G3 Engine Management

What do the inj outputs actually supply?

Posted by James Wingfield at August 25. 2008
I'm thinking of setting up a water injection kit and was thinking about making the WI rate proportional to the fuel injection rate. I was just wondering what the injector drivers actually output as I'm hoping to tap into this signal and use it to drive the WI as well. Thanks, Wingers

Re: What do the inj outputs actually supply?

Posted by James Wingfield at August 25. 2008
Sorry - forgot to say, its an LEM G3 Cheers!

Re: What do the inj outputs actually supply?

Posted by Simon at September 01. 2008

They switch to ground. With an injector connected you will see 0-12V switched. 0 volts when injector is open and 12 volts when its closed.

Re: What do the inj outputs actually supply?

Posted by James Wingfield at September 04. 2008
thanks :)
Powered by Ploneboard
Document Actions
 
Web Design: MetaSolutions -- Web & CMS Development: TheVirtual Ltd.