Personal tools
You are here: Home → Forums → Forums → Link G1 Forum → over heating

over heating

Up to Link G1 Forum

over heating

Posted by toby rodriguez at September 01. 2008
I have an overheating problem. I have a 2000 subaru impreza RS with pnp link. Only on3 radiator fan is turning on. When I put the stock ecu back in both fans turn on. So I think the maybe the Pnp harness is not wired right. Do you have a diagram for the pnp harness and stock harness so I can figure out which wires belong where?

Re: over heating

Posted by Simon at September 01. 2008

The second fan should come on when the AC is running.

Re: over heating

Posted by toby rodriguez at September 01. 2008
ok...but the stock ecu seems to use the both fans but I guess it doesn't on the link.? The overheating must be something else, I'll have to change the thermostat. As of right now my car wants to run at 190 - 195 F.
Powered by Ploneboard
Document Actions
 
Web Design: MetaSolutions -- Web & CMS Development: TheVirtual Ltd.